The METERDI Digital Clamp Meter MR-CM70 is an AC Clamp Meter. It measures up to 600A AC.
The METERDI Digital Clamp Meter MR-CM70 is a T-RMS high-precision, intelligent, and anti-burning clamp meter. This is a 600A AC clamp meter.
The ABS body of Clamp Meter MR-CM70 makes it highly durable and fall-proof. The opening of the tong head is 25mm. The auto range function of this clamp meter automatically switches the measuring range. It comes with a backlight in LCD Display. In this clamp meter flashlight helps the electrician to take his measurements even in dark location.
The variable frequency voltage (V.F.C.) and Non-Contact Voltage Detection (NCV) functions make this clamp meter more special. Thanks to the ‘hard to package chip’ which makes the measurement in MR-CM70 extremely fast and highly precise.
| FUNC | RANGE | ACCURACY | Resolution |
| DCV | 600mV | ±(0.8% rdg + 3 dgt) | 0.1mV |
| 6V | 0.001V | ||
| 60V | 0.01V | ||
| 600V | ±(1% rdg + 5 dgt) | 0.1V | |
| ACV | 6V | ±(1.2% rdg + 5 dgt) | 0.001V |
| 60V | 0.01V | ||
| 600V | ±(1.5% rdg + 10 dgt) | 0.1V | |
| 200-600V (V.F.C) | ±(4% rdg + 10 dgt) | 0.1V/1V | |
| ACA | 6A | ±(4% rdg + 10 dgt) | 0.001A |
| 60A | 0.01A | ||
| 600A | 0.1A | ||
| OHM | 600Ω/6KΩ/60KΩ/600KΩ/6MΩ | ±(1.2% rdg + 2 dgt) | |
| 60MΩ | ±(2% rdg + 5 dgt) | ||
| CAP | 99nF/999nF/9.9µF/99µF/999µF/9.9mF/99mF | ±(4% rdg + 3 dgt) | |
| 6mF/60mF | ±(4% rdg + 5 dgt) | ||
| Hz (through A mode) | 600Hz/1kHz/>1kHz | ±(1.5% rdg + 5 dgt) / for reference only | |
| Hz (through V mode) | 600Hz/6kHz/10kHz/>10kHz | ±(1.5% rdg + 5 dgt) / for reference only | |
| Duty Cycle | Range 10%~95% | ±0.1% | ±3% |
| Diode | Displays the approximate diode forward voltage | 0.001V | |
| Continuity | If the measured line resistance is less than 30Ω, the buzzer inside the instruments will sound. | 0.1Ω | |
1 x Digital Clamp Meter MR-CM70
1 x Carry Case
2 x 1.5V AAA Battery
1 x Test Lead Set
1 x Warranty Card
1 x Manual
1 x Calibration Certificate (with additional cost)
Copyright © 2024. All Right Reserved.
