Digital Clamp Meter MR-CM70

10 in stock

The METERDI Digital Clamp Meter MR-CM70 is an AC Clamp Meter. It measures up to 600A AC.

Description

The METERDI Digital Clamp Meter MR-CM70 is a T-RMS high-precision, intelligent, and anti-burning clamp meter. This is a 600A AC clamp meter.

The ABS body of Clamp Meter MR-CM70 makes it highly durable and fall-proof. The opening of the tong head is 25mm. The auto range function of this clamp meter automatically switches the measuring range. It comes with a backlight in LCD Display. In this clamp meter flashlight helps the electrician to take his measurements even in dark location.

The variable frequency voltage (V.F.C.) and Non-Contact Voltage Detection (NCV) functions make this clamp meter more special. Thanks to the ‘hard to package chip’ which makes the measurement in MR-CM70 extremely fast and highly precise.

Highlights

  • 600V CAT III, pollution level: II.
  • Altitude <2000 m.
  • Maximum allowable voltage between the measuring end and the ground: 600V DC or 600V AC RMS.
  • Sampling rate: about 3 times/sec.
  • Display: 5999 digit LCD.
  • Count: 6000
  • Over range indication.
  • Battery low voltage indicator.
  • Input polarity indicator.
  • Power supply: 2 x AAA DC 1.5V.
  • Dimensions: 191mm × 70mm × 37mm.
  • Weight: about 195g (without battery).

Specification

FUNCRANGEACCURACYResolution
DCV600mV±(0.8% rdg + 3 dgt)0.1mV
6V0.001V
60V0.01V
600V±(1% rdg + 5 dgt)0.1V
ACV6V±(1.2% rdg + 5 dgt)0.001V
60V0.01V
600V±(1.5% rdg + 10 dgt)0.1V
200-600V (V.F.C)±(4% rdg + 10 dgt)0.1V/1V
ACA6A±(4% rdg + 10 dgt)0.001A
60A0.01A
600A0.1A
OHM600Ω/6KΩ/60KΩ/600KΩ/6MΩ±(1.2% rdg + 2 dgt)
60MΩ±(2% rdg + 5 dgt)
CAP99nF/999nF/9.9µF/99µF/999µF/9.9mF/99mF±(4% rdg + 3 dgt)
6mF/60mF±(4% rdg + 5 dgt)
Hz (through A mode)600Hz/1kHz/>1kHz±(1.5% rdg + 5 dgt) / for reference only
Hz (through V mode)600Hz/6kHz/10kHz/>10kHz±(1.5% rdg + 5 dgt) / for reference only
Duty CycleRange 10%~95%±0.1%±3%
DiodeDisplays the approximate diode forward voltage0.001V
ContinuityIf the measured line resistance is less than 30Ω, the buzzer inside the instruments will sound.0.1Ω

Delivery Scope

1 x Digital Clamp Meter MR-CM70

1 x Carry Case

2 x 1.5V AAA Battery

1 x Test Lead Set

1 x Warranty Card

1 x Manual

1 x Calibration Certificate (with additional cost)

Downloads

METERDI-Catalog

Download Our Product Catalog